VIDEO / 04:18
Starting a solar pump safely
What to check before the first Run command reaches the inverter.
PUBLIC KNOWLEDGE CENTER
Learn the system.
Work with confidence.
A practical library for USFULL solar-pump inverters, QueenX gateways, commissioning teams, and the people who keep each well moving.
MANUALSFIELD VIDEOSPARAMETER GUIDESFAULTS & ALARMS
FIELD LIBRARY OPEN
08
Reference pathsFrom installation to daily operation
USFULL / SOLAR PUMPConnected Knowledge Center
LIBRARY INDEX
Start where you are.
MANUAL / PDF
Solar pump inverter manual
Core operating concepts, parameter groups, terminals, and protection behavior.
GUIDE / ENGINEERING
Professional Stop and hold stages
Why a controlled hold can let a deep-well system settle before final stop.
GUIDE / ALARMS
Reading alarms without repetition
A practical explanation of new events, normal alarms, and newest-first history.
VIDEO / 06:32
Connect QueenX to an inverter
Phone, OTG hub, CH340 USB-RS485, permission, and connection-state basics.
NOTE / FIELD
Understanding a 38 Hz vibration band
How to record the observation and plan a safer controlled-deceleration test.
GUIDE / RECORDS
Keep a site record that lasts
Recommended fields for customers, sites, serial numbers, warranty, and service.
REFERENCE / MODBUS
Live register reading map
How the current monitor labels frequency, voltage, current, bus voltage, and health.
⌕
No matching resources
Try another word or choose All resources.
FIELD TOOLS
Find the next safe check.
Parameter explorer
Enter a parameter number to see its purpose, scaling and whether it is read-only or stop-only.
Try a common parameterP00.13, P01.08, P07.27, P15.04, P15.05 or P18.08.
Fault & alarm decoder
Enter the numeric fault value or display name. UV is correctly identified as bus undervoltage—not motor overload.
Stored event sourcesCurrent fault P07.27, history P07.28–P07.29, and normal alarms P07.66–P07.70.
Connection troubleshooter
Choose the last stage that is healthy. Queen will show what to verify next without generating repeated alarms.
Start with the pipelineServer → QueenX WebSocket → USB permission → CH340 → Modbus response → selected inverter.
Recently opened resources will remain on this device for faster return.
NEXT IN THE LIBRARY
From field question to clear answer.
01UnderstandManuals and concepts→02CommissionField checklists→03OperateLive monitoring